Manual

Xerox 4595 Copier/Printer System Administration Guide
4-8
4. E-mail
NOTE 3: When you would like to move to the next value
without entering all 3 digits, select Save/Select Next.
– POP3 Server - Server Name
Enter if By IP Address has been selected for
POP3 Server - Setup.
– POP3 Server - Port Number
Enter a value in the range from 1 to 65535.
– POP3 Server - Server Check Interval
Set the interval for checking the e-mail on the
POP3 server.
– POP3 Server - Server Name
Enter the name to login to the POP3 server.
–POP3 Password
Enter the same password twice in the New
Password and Confirm Password. If you do not
wish to set the password, leave it blank and select
Save.
– POP3 Password Encryption
Select ON(APOP) to encrypt the password.
– Select Save and then select Close.
4. Configure the mail transmission
• Select SMTP Server Settings and then set the following
items for the SMTP server.
– SMTP Server - Setup
Select from By IP Address or By Server Name.
– SMTP Server - IP Address
Enter if By IP Address has been selected for POP3
Server - Setup.