User's Manual

Xerox® SquareFold® Trimmer
This optional finishing device is used in conjunc-
tion with a finisher that contains a booklet maker.
The booklet is assembled and stapled in the
booklet area of the finisher and enters the Trim-
mer Module already assembled.
The trimmer module flattens the booklet spine
which reduces the booklet’s thickness and gives
it the appearance of a perfect-bound book. It
then trims/cuts away the face (edge) of the
booklet, resulting in a neat finished edge.
GBC® AdvancedPunch™
The GBC
®
AdvancedPunch
™
finishing module provides another
level of finishing to your output by allowing you to punch holes
in 8.5 x 11 in./A4 documents that support a variety of binding
styles. For 8.5 x 11 in media, the punch supports from 19 holes
to a maximum of 32 holes. A4 media supports from 21 holes up
to 47 holes.
This device requires an Interface Module and a follow-on finisher.
The Interface Module uncurls paper and provides a communica-
tion hub to the print engine and controller. A follow-on finisher,
such as the Standard Finisher, is necessary to gather punched
output.
For more information, go to www.xerox.com and select the GBC
AdvancedPunch User Documentation.
CZ Fold Unit
The optional folder enables you to create publications featuring bi-fold, C-fold, Z-fold,
and Engineering Z-fold.
Required Finishing Accessories
Depending on the type of finishing device you use, one of the following accessories may
also be required.
2-13Xerox
®
Color C60/C70 Printer
User Guide
Product Overview