User's Manual

• Dual Color: This option allows you to separate the colors of the original into two
groups of colors for copying. The Source Color will be extracted from the original
and be replaced by the Target Area Color. The rest of the colors will be replaced
by the Non-Target Area Color you select.
• Single Color: This option allows you to copy in one of six preset or custom colors.
Reducing or Enlarging the Image
To reduce or enlarge the image:
1. Touch Copy on the Control Panel.
2. To reduce or enlarge the image proportionally, do one of the following:
• Touch the plus or minus buttons.
• Touch More, then touch the plus or minus buttons.
3. To reduce or enlarge the image proportionally by a preset amount, such as to fit a
particular paper size:
• Touch More.
• Touch Proportional %, then touch one of the Preset % buttons.
Note
You can also use the plus or minus buttons to change the percentage.
• To center the image on the page, touch Auto Center. Touch Save.
• To perform a minor adjustment, select Slight Reduction Improved Fit.
4. To reduce or enlarge the width and length of the image by different percentages:
• Touch More, then touch Independent X-Y%.
• To scale the width (X axis) of the image, touch the Width percentage plus or
minus buttons.
• To scale the length (Y axis) of the image, touch the Length percentage plus or
minus buttons.
Note
You can also reduce or enlarge an image by touching one of the Presets.
• To center the image on the page, touch Auto Center.
5. Touch Save.
Selecting the Tray to Use for Copies
The printer automatically selects the paper tray to use for copying based on settings
made by the System Administrator. To use a different paper type for copying on
letterhead, colored paper, or different paper sizes, select the paper tray loaded with the
desired paper.
Xerox
®
Color C60/C70 Printer6-4
User Guide
Copying