User's Manual

Printing a Sample Copy
With a complicated copy job, it can be helpful to print a test copy before printing multiple
copies. This feature prints a single copy and holds the remaining copies. After inspection
of the sample, the remaining copies can be printed using the same settings, or cancelled.
Note
The sample copy is counted as part of the total quantity selected. For example, when
copying a book, if 3 is entered as the number of desired copies; one copy of the book
will be printed, and two other copies will be held until they are released for printing.
To print the sample copy:
1. Touch Copy on the touch screen, then touch the desired copy settings.
2. Touch the Job Assembly tab.
3. Touch Sample Job, then touch On.
4. Touch Save.
5. Press the green Start button on the Control Panel; the sample set is printed.
To print the remaining copies or delete the job:
1. To print the remaining copies of the job, touch Start, or press the green Start button
on the Control Panel.
2. If the sample copy is unsatisfactory, touch Delete.
Combining Original Sets
If the number of originals exceeds the capacity of the document feeder, you can combine
the sets into one job.
To Combine Original Sets:
1. Touch Copy on the touch screen. Touch the desired copy settings, then enter the
number of copies using the alphanumeric keypad on the Control Panel.
2. Touch the Job Assembly tab, then touch Combine Original Sets.
3. Touch On, then touch Save.
4. Place the first set of originals in the document feeder.
5. Press the green Start button on the control panel. Copying begins. The Copy screen
appears on the touch screen.
6. Scan additional sets:
• Place the originals for the next set in the document feeder.
• In the Copy screen, touch Next Original.
• Touch Start on the touch screen, or press the green Start button on the Control
Panel. Copying continues.
7. For each additional set, repeat Step 6.
Xerox
®
Color C60/C70 Printer6-22
User Guide
Copying