Installation Guide

SIQA Software Installation
2-8 Simple Image Quality Adjustment Tool
Installation and Adjustments Guide
Setting Up Communication between
the SIQA Application and the Print
Engine
Setting up communication between the SIQA software application and the print engine varies
depending on the print server that is attached to the machine and whether or not a third-party
PC is being used. The procedures provided here include how to set up and run the SIQA software
on the following:
• Third-party PC through DMP Controller
• EX Print Server (Fiery standalone)
Requires keyboard, monitor and mouse options.
• Third-party PC via an EX Print Server or an Integrated Fiery Color Server
• Third -party PC when a FreeFlow Print Server is installed
Note
For more information on connectivity, refer to Troubleshooting on page 8-1.
Setting Up and Running SIQA Software on a Third-Party PC
Through DMP Controller
1. At the print engine UI record the machine’s IP address by selecting Machine Status >
Device Information.
2. From the PC desktop, double-click the SIQA icon.
The Input_Communication_Parameters window displays.
3. If necessary, enter the printer IP address, and then select OK.