User's Manual

Causes and ActionsYes/NoSymptoms
An error occurred with the printer.CauseYesData remains in the
printer icon
If No, go to next
symptom.
Check the error details.Action
If problem is not solved, go to next
Cause/Action.
The IP address or SMB network path is
misconfigured.
Cause
Configure a correct IP address or SMB network
path.
For information about network settings, refer
to the System Administration Guide.
Action
If problem is not solved, go to next
Cause/Action.
The network connection between the computer
and machine is abnormal.
Cause
Check with your system administrator.Action
If problem is not solved, go to next
Cause/Action.
The port is not enabled.Cause
Enable the port in use.
For information about network settings, refer
to the System Administration Guide.
Action
If problem is not solved, go to next
Cause/Action.
Insufficient space available on the hard disk.Cause
Delete unnecessary data to increase free space.Action
If problem is not solved, go to next
Cause/Action.
The printer is connected to multiple computers.Cause
Wait for a while, and then try printing again.Action
10-35Xerox
®
D110/D125/D136 Printer
User Guide
Problem solving