User's Manual

• Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
• Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-322
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
• Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-324
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
• Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-325
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
• Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
User Guide14-12
Interface Module/Interface Cooling Module