Operating Instructions HOB Contents GB English, 2 Installation, 2-3 Positioning Connecting the hob Disposal Description of the appliance, 4-5 Control panel Cooking zone description Start-up and use, 6 Turning on the hob Turning off the hob The booster The safety devices, 7 ET 6124 ET 6124 X ET 7424 Pan recognition What cookware to use Acoustic signal Safety cut out Overheating protection device Precautions and tips, 8 Practical advice on using the appliance General safety Care and maintenance, 9 Swi
Installation ! Keep all packaging materials out of the reach of children. It may present a choking or suffocation hazard (see Precautions and tips). ! The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals. Built-in appliance Use the appropriate cabinet to ensure that the appliance functions properly.
Connecting the hob The electrical safety of this appliance can only be guaranteed if the latter is correctly and efficiently earthed, in compliance with regulations on electrical safety. Always ensure that this vital safety measure has been taken. If you have any doubts, call in a qualified technician to check the electrical system thoroughly. The manufacturer denies all responsibility for damage resulting from a system which has not been earthed correctly.
Description of the appliance GB Control panel Indicator light corresponding to the PROGRAMMED COOKING ZONE * PROGRAMMED COOKING TIME indicator * POWER (from 0 to 9) and RESIDUAL HEAT indicators 15. 0 TIMER CONTROL key for COOKING TIME PROGRAMMING * 5.
HOBS Cooking zones Back Right (BR) Front Right (FR) Front Left (FL) Back Left (BL) Overall power ET 6004 Power (in W) I 1800 I 1200 I 1800 I 1200 6000 ET 6124 Power (in W) ID 1800 – B 3000* I 1200 – 600 if BR* I 1800 I 1200 6600 ET 7424 Power (in W) I 2400 – B 3000* I 1200 – 600 if BR* IO 1200/2400 – B 3000* I 1200 – 600 7200 I è single induction zone IO è oval induction zone B 3000* è the zone can be boosted to 3000 W 600 if BR* è the power of the cooking zone is reduced to 600 W as long as the BR zone
Start-up and use GB When you connect the hob to the power supply, a beep will sound after a few seconds: you can now turn the hob on. Turning on the hob Press key for 3 seconds to turn the hob on. Cooking zone control Each cooking zone is operated by a control key and by a power adjustment set (+ and -). 0 0 5. 0 Controls lock When the hob is in use, you can lock the controls to avoid any accidental changes to the settings (by children or when cleaning, for example).
The safety devices Acoustic signal Pan recognition Each induction cooking zone is fitted with a pan recognition device. The cooking zone only provides heat in the presence of a pan which is suitable for the cooking zone. A blinking pan recognition indicator could signal: that the pan is made of unsuitable material, which is not ferromagnetic, that the diameter of the pan is too small, that the pan has been removed. Always match the diameter of the pan with that of the cooking zones.
Precautions and tips GB This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. Practical advice on using the appliance To obtain the best results from your hob: Use flat-bottomed pans to ensure that they adhere to the cooking zone perfectly. Always use pans with a diameter that is large enough to cover the hotplate fully, in order to use all the available heat.
Care and maintenance Switching the appliance off Stainless steel frame * Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly.
After Sales Service GB "No company is better positioned to offer an after sales service on a Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer.
Guarantee GB "Satisfaction guaranteed or your money back" We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if you prefer, give you your money back.
09/2007 - 195043663.05 XEROX BUSINESS SERVICES Key Contacts GB After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.