User's Manual

Phaser 8500/8550 PCL Commands
System Administrator Guide
B-7
Input Trays
The following table lists the PCL commands for the input trays supported by the
Phaser 8500/8550 printer. The table also lists the alternate tray used if the optional input tray is
not installed.
Note: When more than one command is listed, you can use either command.
Input Tray PCL 5 Command
*
Alternate Tray
Tray 1 in multi-sheet mode <Esc>&l2H
<Esc>&l3H
<Esc>&l4H
<Esc>&l6H
n/a
Tray 2 <Esc>&l1H n/a
Tray 3 <Esc>&l5H Tray 2
Tray 4 <Esc>&l8H
<Esc>&l20H
Tray 1
Autoselect <Esc>&l7H n/a
Current tray/page eject <Esc>&l0H
* The character that follows the “&” in the command is the lowercase letter “L”.