Multifunction Printer User Guide

Adjusting Copying Options
Phaser® 8510/8560MFP Multifunction Product
4-15
Shifting the Image
In some cases, you may want to change the placement of the image on the copy page.
To change image placement:
1. On the control panel, press the Copy button.
2. In the menu, select
Margin Shift, and then press the OK button.
3. To increase the margin on the long edge of the copy:
a. Select
Long Edge, and then press the OK button.
b. Select a number from
0 through 2.0 inches (in 0.1 inch increments) or from 0 through
50 mm (in 1 mm increments), and then press the OK button.
4. To increase the margin on the short edge of the copy:
a. Select
Short Edge, and then press the OK button.
b. Select a number from
0 through 2.0 inches (in 0.1 inch increments) or from 0 through
50 mm (in 1 mm increments), and then press the OK button.
When you select margin shift options, a page icon with arrows indicating the direction that the
image shifts appears on the right side of the control panel display.
Note: The factory default is Off (long edge margin of 0 and short edge margin of 0).