Multifunction Printer User Guide

Calibrating the Scanner
Phaser® 8510/8560MFP Multifunction Product
5-35
Calibrating the Scanner
This section includes:
■ Starting the Calibration Procedure on page 5-35
■ Calibrating the Scanner at the Document Glass on page 5-36
■ Calibrating the Scanner at the Document Feeder on page 5-37
Perform the scanner calibration procedure if your scanner, document feeder, or document
cover is replaced. Scanner calibration adjusts the output quality of the front and back pages of
2-sided originals in relation to each other. This procedure should not be performed as part
of normal system operation.
Starting the Calibration Procedure
1. On the control panel, press the System button.
2. Select
Information, and then press the OK button.
3. Select
Troubleshooting, and then press the OK button.
4. Select
Service Tools, and then press the OK button.
5. Select
Calibrate Scanner, and then press the OK button. Continue with the Document
Glass steps.
Calibrate the scanner using the Scanner Calibration page
that came with your replacement scanner, document feeder,
or document cover. After you begin the calibration
procedure at the control panel, calibrate the scanner using a
two-step process:
■ The first step scans the calibration page from the
document glass. Follow the steps in the Document
Glass section. (For systems without a document feeder,
only use the steps in this section to calibrate the
scanner.)
■ The second step scans the calibration page through the
document feeder. Follow the steps in the Document
Feeder section.