Multifunction Printer User Guide

Solving Print-Quality Problems
Phaser® 8510/8560MFP Multifunction Product
7-8
Random Light Stripes
Problem
Light stripes appear randomly on the test page when one or more color bars is missing.
Solution
To prevent random light strips from appear on the page:
1. On the control panel, press the System button.
2. Select
Troubleshooting, and then press the OK button.
3. Select
Print Quality Problems, and then press the OK button.
4. Select
Eliminate Light Stripes, and then press the OK button.
a. Select
Basic, and then press the OK button. Repeat this procedure up to two times to
eliminate light stripes.
b. If the problem continues, select
Advanced, and then press the OK button. Follow the
control panel prompts to select the missing jet’s color and number. See the Light
Stripes Test page to determine the color and jet number.
5. If light stripes continue to appear:
a. Turn off the system for at least four hours.
b. Turn on the system and, if necessary, repeat the Basic procedure once.
Light Stripes Test