Multifunction Printer User Guide

Solving Print-Quality Problems

Phaser® 8510/8560MFP Multifunction Product

7-11

Transparency Images Are Too Light or Too Dark

Problem

Text or graphics printed on transparencies are either too light or too dark.

Solution

To prevent transparency text or graphics from being too light or too dark:

1. Verify that Transparency is select in the software application or in the printer driver.

2. Verify that the tray containing the transparencies is set to print transparencies:

a. On the control panel, press the System button.

b. Select

Paper Tray Setup, and then press the OK button.

c. Select

Tray 1 Paper, Tray 2 Paper, Tray 3 Paper, or Tray 4 Paper, and then press the

OK button.

d. Select

Transparency, and then press the OK button.

3. Print the Paper Tips page for more information about transparencies:

a. On the control panel, press the System button.

b. Select

Information, and then press the OK button.

c. Select

Information Pages, and then press the OK button.

d. Select

Paper Tips Page, and then press the OK button.

Note: Use only recommended Xerox transparencies.