Multifunction Printer User Guide

Ordering Supplies
Phaser® 8510/8560MFP Multifunction Product
8-24
Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic
replacement. Replacements may be parts or kits. Routine maintenance items are typically
customer replaceable.
The maintenance kit is the only routine maintenance item for the
Phaser 8510/8560MFP product. To order a replacement maintenance kit, contact your local
reseller or go to www.xerox.com/office/8510_8560supplies
.
To view information about the remaining life of the maintenance kit:
1. On the control panel, press the System button.
2. Select
Information, and then press the OK button.
3. Select
Supplies Info, and then press the OK button.
4. Select
Maintenance Kit Life, and then press the OK button.
See also:
Replacing the Maintenance Kit on page 8-8
When to Order Supplies
The control panel displays a warning when the supply nears its replacement time. Verify that
you have replacements on hand. It is important to order these supplies when the messages first
appear to avoid interruptions to your printing. The control panel displays an error message
when the supply must be replaced.
To order supplies, contact your local reseller or go to the Xerox Supplies website at
www.xerox.com/office/8510_8560supplies
.
Caution: Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service
Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or
degradation of performance caused by use of non-Xerox supplies, or the use of Xerox supplies
not specified for this system. The Total Satisfaction Guarantee is available in the United States
and Canada. Coverage may vary outside these areas; please contact your local representative
for details.
Recycling Supplies
For information on Xerox supplies recycling programs, go to www.xerox.com/gwa.