Multifunction Printer User Guide

Moving and Repacking the System
Phaser® 8510/8560MFP Multifunction Product
8-25
Moving and Repacking the System
This section includes:
■ Precautions for Moving the System on page 8-25
■ Moving the System Within the Office on page 8-25
■ Preparing the System for Shipment on page 8-27
Caution: Parts of the system are hot. To avoid personal injury or damage to the system, allow
the ink to solidify. Run the
Shutdown for Moving System procedure on the control panel to
cool the system quickly.
Precautions for Moving the System
To view precautions and guidelines for safely moving your system, see User Safety on
page A-1 in this user guide.
Moving the System Within the Office
To move the system within the office:
1. Close the system’s door and covers.
2. Press the power switch located under the interface cover on the side of the system.
3. Within 10 seconds after turning off the system, select
Shutdown for Moving System on
the control panel.
Note: If you receive a
Power Down Error-Head not Parked message at the control
panel, the system is not ready to be moved. If the printhead is not locked, the system can
be damaged during shipment.
8560-117