Multifunction Printer User Guide

Setting Up the Network

Phaser® 8510/8560MFP Multifunction Product

2-3

Setting Up the Network

This section includes:

■ Choosing a Connection Method on page 2-3

■ Connecting via USB on page 2-3

■ Connecting via Ethernet (Recommended) on page 2-3

Choosing a Connection Method

Connect the system via Ethernet or USB. A USB connection is a direct connection and not

used for networking. An Ethernet connection is used for networking. Hardware and cabling

requirements vary for the different connection methods. Cabling and hardware are generally

not included with your system and must be purchased separately.

Connecting via USB

If you are connecting to one computer, a USB connection offers fast data speeds. However, a

USB connection is not as fast as an Ethernet connection. To use USB, PC users must have

Microsoft Windows 98 SE, Windows 2000, or Windows XP. Macintosh users must use

Mac OS 9.x and higher.

USB Connection

A USB connection requires a standard A/B USB cable. This cable is not included with your

system and must be purchased separately. Verify that you are using the correct USB cable for

your connection.

1. Connect one end of the USB cable to the system and turn it on.

2. Connect the other end of the USB cable to the computer.