Multifunction Printer User Guide

Selecting Printing Options
Phaser® 8510/8560MFP Multifunction Product
3-21
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before
sending the job to the system. For example, if you want to use the High-Resolution
print-quality mode for a particular graphic, select this setting in the driver before printing that
job.
1. With the desired document or graphic open in your application, access the Print dialog
box.
2. Select the Phaser 8510/8560MFP product and click the Properties button to open the
printer driver.
3. Make selections from the driver tabs. See the following table for specific printing options.
Note: In Windows 2000, Windows XP, and Windows Server 2003, you can save current
printing options with a distinctive name and apply them to other print jobs. Select either
the Paper Quality, Output Options, or TekColor tab, and then select a Saved Setting.
Click the Help button for more information.
4. Click the OK button to save your selections.
5. Print the job.
See the following table for specific printing options:
Printing Options for Windows Operating Systems
Operating
System Driver Tab Printing Options
Windows 2000,
Windows XP, or
Windows Server
2003
Layout tab
■ Orientation
■ Automatic 2-sided printing
■ Pages per sheet
Paper/Quality tab
■ Document size, paper type, and tray selection
■ Cover pages
■ Print quality
■ Saved settings
Output Options tab
■ Separation pages
■ Secure prints, personal prints, personal saved
prints, proof prints, saved prints, print with, and fax
■ End of job notification
■ Saved settings
TekColor tab
■ Color corrections
■ Black and white conversion
■ Color adjustments
■ Saved settings