Multifunction Printer User Guide

Printing on Both Sides of the Paper
Phaser® 8510/8560MFP Multifunction Product
3-28
Printing Side Two
1. Remove the paper from the output tray and reload it in the paper tray:
■ Tray 1: Insert side two facedown with the top of the page entering the system first.
■ Tray 2, 3, or 4: Insert side two faceup with the top of the page toward the front of the
tray.
2. Select
2nd Side on the control panel:
3. In
the printer driver, select 2nd Side as the paper type or the appropriate tray as the paper
source.
Tray 1 Tray 2, 3, or 4
a. Select
Change setup, and then
press the OK button.
b. Select the appropriate paper size, and
then press the OK button.
c. Select
2nd Side, and then press the
OK button.
a. Press the System button.
b. Select
Paper Tray Setup, and then
press the OK button.
c. Select either
Tray 2 Paper, Tray 3
Paper
, or Tray 4 Paper, and then
press the OK button.
d. Select one of the following options:
■ Select Use current setup, and
then press the OK button.
■ Select Change setup, and then
press the OK button. Go to Step e.
e. Select
2nd Side, and then press the
OK button.