User's Manual

Phaser 6300/6350 PCL Commands
System Administrator Guide
B-2
Phaser 6300/6350 PCL Commands
This section includes:
■ Media Size on page B-2
■ Media Type on page B-3
■ Input Trays on page B-4
Media Size
The following table lists the PCL commands for the media sizes supported by the
Phaser 6300/6350 printer. For information on the corresponding trays supported, print the
Paper Tips page. See Paper Tips Page on page 5-6.
Note: If you are using custom sizes in PCL commands, you need to load the paper into the
tray, set the type and size on the control panel, select the printing options in the printer driver,
and then send the job to the printer from the software application’s Print dialog box.
Media Size PCL 5 Command
*
A4 (210 x 297 mm) <Esc>&l26A
A5 (148 x 210 mm) <Esc>&l25A
A6 (105 x 148 mm) <Esc>&l24A
ISO-B5 (176 x 250 mm) <Esc>&l65A
B5-JIS (182 x 257 mm) <Esc>&l45A
Statement (5.5 x 8.5 in.) <Esc>&l15A
Executive (7.25 x 10.5 in.) <Esc>&l1A
Letter (8.5 x 11in.) <Esc>&l2A
US Folio (8.5 x 13 in.) <Esc>&l10A
Legal (8.5 x 14 in.) <Esc>&l3A
A7 Envelope (5.25 x 7.25 in.) <Esc>&l84A
B5 Envelope (175 x 250 mm) <Esc>&l100A
#10 Commercial Envelope (4.12 x 9.5 in.) <Esc>&l81A
Monarch Envelope (3.87 x 7.5 in.) <Esc>&l80A
C5 Envelope (162 x 229 mm) <Esc>&l91A
C6 Envelope (114 x 162 mm) <Esc>&l92A
DL Envelope (110 x 220 mm) <Esc>&l90A
Custom <Esc>&l101A
* The character that follows the “&” in the command is the lowercase letter “L”.