User's Manual

Installing Printer Software in Windows
5
N OTE : If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click
Next .
• If you don’t want to connect the printer at this time, click
Next , and No
on the following screen. Then the installation will start and a test page
will not be printed at the end of the installation.
• The installation window that appears in this User’s Guide may
differ depending on the printer and interface in use.
5 After the installation is finished, a window asking you to print a test
page appears. If you choose to print a test page, select the
checkbox and click
Next .
Otherwise, just click
Next and skip to step 7.
6 If the test page prints out correctly, click Yes .
If not, click
No to reprint it.
7 Click Finish .
N OTE : After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver. See “Reinstalling Printer Software”
on page 9.
Custom Installation
You can choose individual components to install.
1 Make sure that the printer is connected to your computer and
powered on.
2 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click
Start and then
Run . Type X:\Setup.exe , replacing “ X ” with the letter which
represents your drive and click
OK .
If you use Windows Vista, click
Start → All programs →
Accessories → Run , and type X:\Setup.exe .
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the
User Account Control window.
3 Click Install Software .
4 Select Custom installation . Click Next .
5 Select your printer and click Next .