User's Manual

Installing Printer Software in Windows
9
7 Select the components to be installed. After selecting the
components, the following window appears. You can also change
the printer name, set the printer to be shared on the network, set
the printer as the default printer, and change the port name of each
printer. Click
Next .
To install this software on a server, select the
Setting up this
printer on a server
checkbox.
8 After the installation is finished, click Finish . If you choose to print a
test page, select the checkbox.
9 If the test page prints out correctly, click Yes .
If not, click
No to reprint it.
10 Click Finish .
N OTE : After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver. See “Reinstalling Printer Software”
on page 9.
Reinstalling Printer Software
You can reinstall the software if installation fails.
1 Start Windows.
2 From the Start menu select Programs or All Programs → your
printer driver name → Maintenance .
3 Select Repair and click Next .
4 The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next .
• If you do not see your printer on the list, click
Update to refresh
the list, or select
Add TCP/IP Port to add your printer to the
network. To add the printer to the network, enter the port name
and the IP address for the printer.
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
You will see a component list so that you can reinstall any item
individually.