User's Manual
Advanced Printing
21
Printing on Both Sides of Paper
You can print on both sides of a sheet of paper. Before printing, decide
how you want your document oriented.
The options are:
• Printer Setting, if you select this option, this feature is
determined by the setting you’ve made on the control panel of the
printer.
If this option does not appear, your printer does not have
this feature.
•
None
•
Long Edge
, which is the conventional layout used in book binding.
•
Short Edge
, which is the type often used with calendars.
• Reverse Duplex Printing, allows you to select general print order
compare to duplex print order.
If this option does not appear,
your printer does not have this feature.
N
OTE
:
• Do not print on both sides of labels, transparencies, envelopes, or
thick paper. Paper jamming and damage to the printer may result.
1
To change the print settings from your software application, access
printer properties. “Printing a Document” on page 13.
2
From the
Layout
tab, select the paper orientation.
3
From the
Double-sided Printing
section, select the binding option
you want.
4
Click the
Paper
tab and select the paper source, size, and type.
5
Click
OK
and print the document.
Long Edge
▲
Short Edge
▲
25
3
2
5
3
2
5
3
2
5
3
Printing a Reduced or Enlarged
Document
You can change the size of a page’s content to appear larger or smaller
on the printed page.
1
To change the print settings from your software application, access
printer properties. See “Printing a Document” on page 13.
2
From the
Paper
tab, select
Reduce/Enlarge
in the
Printing Type
drop-down list.
3
Enter the scaling rate in the
Percentage
input box.
You can also click the or button.
4
Select the paper source, size, and type in
Paper Options
.
5
Click
OK
and print the document.
Fitting Your Document to a Selected
Paper Size
This printer feature allows you to scale your print job to any selected
paper size regardless of the digital document size. This can be useful
when you want to check fine details on a small document.
1
To change the print settings from your software application, access
printer properties. See “Printing a Document” on page 13.
2
From the
Paper
tab, select
Fit to Page
in the
Printing Type
drop-
down list.
3
Select the correct size from the
Output size
drop-down list.
4
Select the paper source, size, and type in
Paper Options
.
5
Click
OK
and print the document.
A