Operation Manual

Scanning Procedure

117

Press the <All Services> button

on the control panel.

Select a scan service on the

touch screen.

NOTE: If the Authentication and

Accounting feature is enabled, you

may be required to enter the user ID

and passcode (if one is set up). If

you need assistance, contact the System Administrator.

Press the <Clear All> button once on the control panel to cancel any previous

selections.

Set the desired features on each tab.

For information on the features available on each tab, refer to the following:

E-mail – page 120

Scan to Mailbox – page 124

Network Scanning – page 124

Scan to PC – page 125

General Settings – page 128

Advanced Settings – page 131

Layout Adjustment – page 134

E-mail Options/Filing Options – page 139

3. Start the Scan Job

Press the <Start> button to scan

the documents.

NOTE: If the Authentication and

Accounting feature is enabled, you

may be required to enter the user ID

and passcode (if one is set up). If

you need assistance, contact the

System Administrator.

<Clear All> button<All Services> button

<Start> button