Operation Manual

3 Copy

• No Folding - Disables the Folding function.

• Single Fold - Makes a crease in each sheet of the outputs for easy folding.

Booklet Creation

Displays the [Booklet Creation] screen. This feature is identical to [Booklet Creation] on

the [Output Format] tab. For information, refer to

Booklet Creation on page 62

Hole Punch & More

Displays the [Copy Output] Screen. For more information, refer to

[Copy Output]

Screen on page 54

NOTE: [Hole Punch & More] appears when the Office Finisher LX is installed. When

the Integrated Office Finisher is installed, or when a finisher is not installed, [More] is

displayed instead.

[Copy Output] Screen

Allows you to select the staple and/or hole-punch position and sorting method for your

output, and to specify the output tray.

NOTE: The screen shown on the

right is displayed when the Office

Finisher LX is installed. If the

Integrated Office Finisher is

installed, or if a finisher is not

installed, the display will be

different.

Paper Supply

Displays the [Paper Supply] screen. Select a paper tray for your copy job.

Staple

Allows you to specify the staple position.

• No Staple - Disables the feature.

• 1 Staple - Attaches one staple to the top left corner of the output.

• 2 Staples (Left) - Attaches two staples along the left edge of the output.

• 2 Staples (Top) - Attaches two staples along the top edge of the output.

NOTE: When the Integrated Office Finisher is installed, or when a finisher is not

installed, the [2 Staples (Left)] and [2 Staples (Top)] options are not available.

Hole Punch

Allows you to specify the hole-punch position.

NOTE: When the Integrated Office Finisher is installed, or when a finisher is not

installed, the [Hole Punch] options are not available.

• No Punch - Disables the feature.

• 2 Hole Punch - Punches two holes in the left edge of the output.

• 3 Hole Punch - Punches three holes in the left edge of the output.

• Top - Selecting [2 Hole Punch] or [3 Hole Punch] and this check box punches two

holes or three holes in the top edge of the output.