All in One Printer User Manual

XEROX WorkCentre 5735/5740/5745/5755/5765/5775/5790 Information Assurance Disclosure Paper
Ver. 2.00, March 2011 Page 10 of 50
2.2.3. External Connections
Figure 2-3 Back panel connections
Interface Description / Usage
FAX line 1, RJ-11 Supports FAX Modem T.30 protocol only
FAX line 2, RJ-11 Supports FAX Modem T.30 protocol only
USB Host Port
Software upgrade
PSW USB Target Port
Direct-connect printing; Xerox diagnostic tools (PSW and CAT)
and Xerox copier assistant
Ethernet 10/100/1000 Network connectivity
Scanner Proprietary connection between the scanner and controller
carrying power and communications
Serial Port Engineering development debug; default state is disabled
Foreign Device Interface (FDI) Allows connection of optional access control hardware
Table 4 Controller External Connections
2.2.4. USB Ports
The WorkCentre contains a host connector for a USB flash drive, enabling upload of software upgrades and
download of network logs or machine settings files.
Autorun is disabled on this port. No executable files will be accepted by the port.
Modifying the software upgrade, network logging or saved machine settings files will make the files unusable on a
WorkCentre .
The data in the network logging file is encrypted and can only be decrypted by Xerox service.
The machine settings that can be saved and restored by a service technician are limited to controller and fax
parameters that are needed for normal operation. For example, the fax address book can be saved and restored by a
service technician.
There is no method for a user, administrator or technician to move image data from the WorkCentre to a USB device.
USB
USB port and location Purpose
USB Host ports Software upgrade