Operation Manual

Layout Adjustment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Workflow Scanning
131
Edge Erase
Edge Erase enables you to specify how much of the image to erase around the edges of your
document. For example, you can remove the marks caused by punched holes or staples in your original.
The options are:
• All Edges is used to erase an equal amount from all
the edges. Use the arrow buttons to adjust the
amount to be erased from 1 mm to 50 mm (0.1” to
2.0”). All marks or defects within the measurement set
are deleted.
• Individual Edges enables an individual amount to be
erased from each of the edges, on both the first and
second sides.
Use the arrow buttons to adjust the amount for each edge, from 1 mm to 50 mm (0.1” to 2.0”).
• Scan to Edge use this option to scan to the edge of the image.
Select Save to save your selections and exit.