Operation Manual

Bypass Tray
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Paper and Media
227
Bypass Tray
The Bypass Tray is a paper tray on the left hand side of your device and can be folded away when not
in use. It is primarily intended for use as a small quantity, special materials feeder and accommodates
media of all types including transparencies (non-paper backed), envelopes and tabs.
When media is detected in the Bypass Tray a paper settings screen is displayed. The drop-down menus
are used to change the size, type and color of the media loaded. The guides automatically detect the
size of media loaded and the device gives a warning if the guides are not set correctly or a non-
standard media size is used. The following media can be loaded in the Bypass Tray:
• Up to 100 sheets of 75 gsm or 20 lb paper.
• Weights from 60 to 216 gsm (16 to 56 lb).
Note: For 80 gsm paper capacities are slightly lower than specified.
• Media sizes in the range A6 SEF to A3 SEF (4.25x5.5” SEF to 11x17” SEF). Envelope sizes DL to C4
(#10 to 9x12”), all envelopes must be fed Short Edge Feed (SEF).
•Media types:
•Plain, Bond and Recycled
•Punched
• Letterhead and Pre-printed
• Heavyweight
• Transparency
•Labels
• Pre-cut tabs
•Envelopes
• Rough Surface
Note: Labels can only be printed 1-sided.