Operation Manual

Device Settings
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Administration and Accounting
253
Device Settings
The Device Settings are used to customize options which
are specific to the device, such as Energy Saver and Paper
Tray settings.
General
Select the General option to access the following settings:
• Energy Saver on page 253
• Date & Time on page 254
• Audio Tones on page 254
• Entry Screen Defaults on page 254
• Measurements on page 255
Energy Saver
The device is designed to be energy efficient and automatically reduces its power consumption after
periods of inactivity. This utility enables the Administrator to modify the time the device spends
between standby, low power and sleep modes.
• Intelligent Ready wakes up and sleeps automatically based on previous usage.
• Job Activated wakes up the device when activity is detected. There are two modes, Low Power
Mode and Sleep Mode. Enter the minutes required for each option or use one of the Auto Presets
options.
• From Standby Mode to Low Power Mode enter a time between 1 and 120 minutes.
• From Low Power Mode to Sleep Mode enter a time between 10 and 120 minutes.
• Auto Presets these presets have been setup with recommended settings that comply with
energy saving regulations. To use one of the preset options, select the option required. The
settings for the option are displayed in the entry boxes.