Operation Manual

General Care
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
General Care and Troubleshooting
289
Staple Cartridges and Hole Punch Waste
If your device is equipped with a finisher, or a convenience stapler, you will be required to replace the
staple cartridge or cartridges when the device displays a message instructing you to do so. If your
finisher has the optional hole punch unit, you will also be required to empty the hole punch waste
container when prompted by the device.
The staple cartridge for the Basic Office Finisher contains 3000 staples. The Office Finisher and High
Volume Finisher staple cartridges hold 5000 staples each. The High Volume Finisher with Booklet
Maker has 2 additional staple cartridges located within the Booklet Maker, each of these cartridges
holds 2000 staples. To replace a staple cartridge, follow the instructions provided with the new staple
cartridge.
The hole punch waste container is a catch tray that collects the waste punched paper. Your device will
prompt you when the hole punch waste container needs emptying.
1. Open the finisher door and locate the hole punch waste
container.
2. Slide the hole punch waste container out of the finisher.
Dispose of the waste punched paper in the waste bin.
3. Install the emptied hole punch waste container, ensuring
that the container is inserted correctly.