Operation Manual

Layout Adjustment

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Copy

Edge Erase

Edge Erase enables you to specify how much of the image to erase around the edges of your

document. For example, you can remove the marks caused by punched holes or staples in your original.

The options are:

• All Edges is used to erase an equal amount from all the edges. Use the arrow buttons to adjust the

amount to be erased from 3 mm to 50 mm (0.1” to 2.0”) or select the entry field and enter the

amount required. All marks or defects within the measurement set are deleted.

• Individual Edges enables an individual amount to be

erased from each of the edges, on both the first and

second sides. Use the arrow buttons to adjust the

amount to be erased from 3 mm to 50 mm (0.1” to

2.0”) or select the appropriate entry field and enter the

amount required.

• Print to Edge is used to print to the edge of the output

documents.

Note: This option may reduce the ability of the system to clean itself and can cause defects on the

output if used excessively.

Select Save to save your selections and exit.

Invert Image

Invert Image allows you to reverse the image or create a

negative. This feature is useful for originals that have a

substantial amount of dark background or light text and

images, saving on toner usage.

The options are:

• Mirror Image reverses the original image creating a mirror of the

original.

• Negative Image converts the dark image areas in the original to

light, and the light image areas to dark.

Select Save to save your selections and exit.