Operation Manual

Job Assembly
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Copy
63
Job Assembly
Use the productivity features available on the Job Assembly
tab to program a job that requires individual selections for
specific pages or sections, produce a Sample Job before
printing the whole job or for storing and retrieving
frequently run job settings.
Build Job
Use this feature to build a job that requires
different settings for each page, or a segment of
pages.
You can select the appropriate settings to be
applied to individual pages or segments of a
completed job. First split the originals into
sections for individual programing.
1. Select Build Job on the Job Assembly tab.
2. Switch on Build Job by selecting the On button and
select Save.
3. Select the features required for the first segment of
the job.
If using Build Job for a job with tabs, ensure the tabs
are loaded correctly and select the tray containing the
tabs. For loading instructions, select the Tab Loading
Instructions... option.
Note: If tab media is selected, the image will be shifted 13mm (0.5”) to the right automatically if
the tab original is A4 or 8.5x11” size.
4. Load the first segment originals and press Start.
5. Remove the first segment originals after they have been scanned. The Build Job screen displays
the first segment in the list. The following options can be applied to any segment:
• Sample Last Segment produces a proof print of the last segment scanned. The proof is
delivered to the output module. If you are satisfied with the proof you can continue
programing the Build Job.
• Delete Last Segment deletes the last segment scanned. You can continue programing the
Build Job.
• Delete All Segments deletes the current Build Job and returns you to the main Build Job
screen.
6. Select the options required for the second segment.
Some pages
with text and
some with
photos
Some pages
2 sided and
some 1 sided
Various
sized
originals
More than
100 pages