Operation Manual

Fax
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Fax
83
Book Faxing
CAUTION: Do not close the document feeder when scanning bound originals.
Select Book Faxing to specify which page or pages of a book are to be scanned. The book original is
placed face down on the document glass with the spine of the book lined up with the marker on the
rear edge of the document glass. Align the top of the bound original against the rear edge of the
document glass.
The device will identify the size of the original during scanning. If the pages have a black or dark
colored border the device will assume that the pages are smaller than they really are. To overcome this
use the Custom Scan Areas feature in Original Size to enter the exact size of the page. Refer to
Original Size on page 82 for more information.
The options are:
• Both Pages use to scan both pages, the left page of
the book will be scanned first. Use the arrow buttons to
specify an amount from 0 to 50 mm (0 to 2”) to be
deleted from the center of the book in order to delete
unwanted marks reproduced from the gutter of the
book.
• Left then Right or Right then Left is used to scan
both pages, but the pages will be scanned in the order
specified. These options replace the Both Pages option and will not be displayed unless enabled
in Tools. Refer to Display Options on page 261 of Administration and Accounting.
• Left Page Only use to scan the left page only. Use the arrow buttons to specify an amount from 0
to 25mm (0 to 1”) to be deleted from the right side of the page in order to delete unwanted marks
reproduced from the gutter of the book.
• Right Page Only use to scan the right page only. Use the arrow buttons to specify an amount
from 0 to 25mm (0 to 1”) to be deleted from the left side of the page in order to delete unwanted
marks reproduced from the gutter of the book.
Select Save to save your selections and exit.
Several pages of a bound document can be faxed using the Build Job feature. Refer to Build Job on
page 90 for more information.