Operation Manual

Paper/Output

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

155

Paper

This option displays information about the paper to use for the print job, such as size and type.

To change the paper to use for printing, select the Paper drop-down menu. The options are:

• Other Size select this option to display the Paper Size screen.

Select the paper size and scaling amount required.

• Other Color use this option to select a paper color for the print

job. Select a color from the drop-down menu. Use

Automatically Select to enable the printer to select a paper

color.

• Other Type use this option to select a type of paper or media to

use for the print job. Use Automatically Select to enable the

printer to select a type.

• Select by Tray use this option to select a specific tray for

printing the job. The printer only uses the paper in the selected tray, even when more than one

tray contains the same paper size and type. Use Automatically Select to enable the printer to

select a tray loaded with the size and type of paper selected for the job.

Advanced Paper Selection

Select this option to display the Advanced Paper Selection screen. If

there is a bi-directional connection to the printer, the media loaded

in each of the trays is shown.

Select the paper tray, size, color and type to use for printing.

If Pre-Cut Tab is selected as the paper type, the image will be

shifted 13mm (0.5”) to the right automatically. Ensure the correct

tab sequence and number of tabs are loaded for the job.

Note: For information about loading different media, refer to Media Types on page 233 of Paper

and Media.

Transparency Separators

Select this option to display the Transparency Separators screen. If

this option is selected, a blank or printed sheet is placed after each

transparency. The paper type for your job must be set to

Transparency using the Other Type menu option.

• Select Blank Separators or Printed Separators using the

Separator Options drop-down menu.

• Select the Separator Color.