Operation Manual

Copying an ID Card
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
ID Card Copy
204
Copying an ID Card
1. Lift up the document feeder. Place the ID card face down onto the document glass and register it
to the arrow at the top right rear corner. Close the document feeder.
2. Press the Clear All (AC) button once to cancel any previous screen programing selections.
3. Press the Services Home button and select the ID Card Copy option.
The ID Card Copy features are displayed.
4. Select the required enlargement or reduction.
5. Select the paper tray required for the job. The graphic on the screen changes to reflect the
orientation of the output paper.
6. Select the Side 1 - Image Quality option and program
the features required for side 1.
Select the Side 2- Image Quality option and program
the features required for side 2.
7. Enter the copy quantity using the numeric keypad and
press Start to scan side 1 of the ID card.
8. Lift up the document feeder and turn over the ID card
to enable side 2 to be scanned. Close the document
feeder.
9. Press Start to scan side 2 of the ID card.
The job is processed and printed. Retrieve your copies from the output tray.
If your job is held in the list it requires additional resources to print. To identify the resources required,
select the Job Status button. Select your job in the list and select Job Details. Once the resources are
available the job will print.