Operation Manual

Device Settings
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Administration and Accounting
260
Output Performance
This feature enables the Administrator to optimize the performance of the finisher for either speed or
improved stacking alignment. The feature is only available if your device is fitted with a High Volume
Finisher.
Note: This setting does not apply to stapled jobs.
• Optimum Speed this option produces well stacked jobs at the maximum operating speed of the
device.
• Optimum Stacking with this option selected the output prints will be collated every 10 pages.
This will produce better alignment of the finished stack but will reduce the output speed of the
device.
Staple Productivity Mode
This feature enables the Administrator to improve productivity when stapling long edge feed,
landscape jobs. The feature is only available if your device is fitted with a High Volume Finisher.
• Enable delivers landscape documents stapled in the top right corner.
• Disable delivers landscape documents stapled in the top left corner.
Display Brightness
Enables you to adjust the brightness of the touch screen to suit the ambient light levels.
• Adjust the brightness as required using the indicator.
Xerographic Module Cleaning
This option is used to initiate the Xerographic Module Cleaning cycle. This will help prolong the life of
the Xerographic Module (R2) and maintain image quality.
• Select the Clean button. A message is displayed stating that Xerographic Module Cleaning is in
progress.
• When the message disappears the cleaning cycle is complete.
Option Enablement
If you have been instructed to enter an enablement code by the Xerox Support Center, use this option
to enter the code.
• Select the entry box and enter the code using the numeric keypad.
• Select Enter.