Operation Manual

Job Assembly

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Copy

Retrieve Saved Settings

This feature enables you to Retrieve Saved Settings from the device memory and apply them to the

current job. Changes can be made to the retrieved settings, but these will not be stored with the saved

settings. To retrieve saved settings:

1. Select the Retrieve Saved Settings button on the Job

Assembly tab.

2. Use the arrow buttons to enter the number for the

saved settings.

3. Select the Load Settings button, to retrieve the

programing information.

The recalled programing features become active.

4. You can modify the features further. These additional

modifications are not saved with the saved settings. Modify the selections as required.

5. Load your originals and press the Start button to run the job.