Operation Manual

Fax
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Fax
73
5. If required, select Add to add the number entered to the Recipient list. Enter additional numbers
as required. The fax will be sent to all the numbers in the Recipient list.
6. Select the required features for your fax job using the touch screen:
7. Press Start to scan the originals and process the fax job. Remove the originals from the document
feeder or document glass when scanning has completed.
Note: The Fax job enters the job list ready for sending.
8. Select Job Status to view the job list and check the status of your job.
Dialing Options
The dialing options enable you to enter the destination fax number or numbers. Select the appropriate
dialing option for your fax job.
Manual Dialing
1. Select the fax number field and enter the fax number
required using the numeric keypad.
2. If special characters are required, use the Dialing
Characters option to enter the number plus additional
dialing characters. Refer to Dialing Characters on
page 74 for further information.
3. Select Add to add the number to the Recipient list.
Enter additional numbers as required.
4. To amend the Recipient list:
• Select the entry in the list. If necessary, use the scroll bar to access all the entries.
•Use Edit to amend the entry. Use Remove to delete the entry from the list, or Remove All to
delete all entries.
The fax will be sent to all the numbers in the Recipient list.
Dialing Characters are alphanumeric characters which have a specific fax function and can be
entered as part of the fax number.
Cover Letter allows you to send a fax with a covering letter.
2-Sided Scanning is used to select whether your originals are 1-sided or 2-sided.
Original Type is used to define the original document as text, text and photo, photo or halftone
photo.
Resolution can be used to optimize the resolution settings.