User's Manual

1
Services Home
2
Job Status
3
Touch Screen
4
Start
5
Clear All
6
Stop
1
2
3
4
5
6
Control panel
OR
Document feeder option
Document glass option
How to Scan to Your Network
Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents1. OR lift up the document
feeder. Place the document face down onto the document glass and register it to the arrow at the top left corner. Close the document feeder.
Press the Clear 2.
All (AC) button to cancel any previous screen programing selections.
Press the3.
Services Home button on the Control Panel.
Select the 4. Workfl ow Scanning button on the touch screen.
If required, select the 5.
Workfl ow Scanning tab. This is usually the active tab when the Workfl ow Scanning service opens.
Select a template type from the 6.
All Templates dropdown menu.
Select the required template from the list7.
Select any options required.8.
Press the 9.
Start button on the Control Panel to scan the original.
For more information
Please refer to: user guides - available
via
http://www.support.xerox.com
©2012 Xerox Corporation. All rights reserved. XEROX®, XEROX and Design® are trademarks of Xerox Corporation in the U.S. and/or other countries.
IG120003
Xerox
®
WorkCentre™ 5845/5855/5865/5875/5890