Administrator's Guide

Network Connectivity
38 Xerox
®
WorkCentre
®
5945/5955 Multifunction Printer
System Administrator Guide
To configure IPv6 settings:
1. For Protocol, select Enabled.
2. To allow the router to assign address prefixes, under Stateless Addresses, select Use Router
Supplied Prefixes.
3. To select how DHCP operates for IPv6, under Default Dynamic Host Configuration Protocol (DHCP)
Settings, select an option.
4. To enter an address manually, under Enable Manual Address, select Enable Manual Address. Select
a Router Prefix from the menu, or type a new router prefix, then click Add.
5. Click Apply to save the new settings or Undo to retain the previous settings.
6. For Protocol, select Enabled.
7. To allow the router to assign address prefixes, under Stateless Addresses, select Use Router
Supplied Prefixes.
8. To select how DHCP operates for IPv6, under Default Dynamic Host Configuration Protocol (DHCP)
Settings, select an option.
9. To enter an address manually, under Enable Manual Address, select Enable Manual Address. Select
a Router Prefix from the menu, or type a new router prefix, then click Add.
10. Click Apply to save the new settings or Undo to retain the previous settings.