User's Manual

Printing

WorkCentre 7755/7765/7775 Multifunction Printer

User Guide

Guidelines

• Use labels designed for laser printing.

• Do not use vinyl labels.

• Do not use dry gum labels.

• Print only on one side of the sheet of labels. Use full sheet labels only.

• Do not use any sheet where labels are missing; it may damage the printer.

• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original

packaging until ready to use. Return any unused sheets of labels to the original packaging and

reseal it.

• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing

them in extreme conditions may cause print quality problems or cause them to jam in the printer.

• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and

jam in the printer.

• Extra Heavyweight Labels can only be fed from Tray 5 (Bypass Tray).

• In the printer driver, select either Labels, Heavyweight Labels, or Extra Heavyweight Labels as

the paper type or the tray containing the labels.

Printing on Glossy Paper

Glossy paper can be printed from Trays 1, 2, 3, 4, and 5 (Bypass Tray).

To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox

Supplies website for your printer: www.xerox.com/office/WC7755_WC7765_WC7775supplies.

Guidelines

• Do not open sealed packages of glossy paper until you are ready to load them into the printer.

• Leave glossy paper in the original wrapper, and store unopened packages in the original shipping

carton until ready to use.

• Remove all other paper from the tray before loading glossy paper.

• Load only the amount of glossy paper you plan to use and remove the unused portion from the

tray when you are finished printing. Replace the unused portion in the original wrapper and seal for

later use.

• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to

curl and jam in the printer.

• In the printer driver, select Gloss Coating, Heavyweight Gloss Coating or Extra Heavyweight

Gloss Coating as the paper type, or select the tray containing the glossy paper.