User's Manual

Using CentreWare Internet Services to Configure Settings on the Machine
Xerox WorkCentre 7232/7242 System Administration Guide 61
Traps:
• TRAP Community Name: Enter the trap community name of the SNMP
agent.
• Trap to be Received: Select the types of traps to receive from the SNMP
agent.
- Add UDP IPv6 Address: This button displays the [SNMP Configuration -
IPv6] page, which allows you to set the following settings.
IP Trap Destination Address:
• IP Address: Enter the IPv6 address of the SNMP agent that you are setting
up to receive traps.
• UDP Port Number: Enter the UDP port number of the SNMP agent.
• SNMP Version: Select the SNMP version of the SNMP agent.
Traps:
• TRAP Community Name: Enter the trap community name of the SNMP
agent.
• Trap to be Received: Select the types of traps to receive from the SNMP
agent.
- Add IPX Address: This button displays a page that allows you to set the
following settings.
IPX Trap Destination Address:
• IPX External Network Number: Enter the IPX external network number of
the SNMP agent you are setting up to receive traps.
• Physical MAC Address: Enter the physical MAC address of the SNMP
agent.
• IPX Socket Number: Enter the IPX socket number of the SNMP agent.
• SNMP Version: Select the SNMP version of the SNMP agent.
Traps:
• TRAP Community Name: Enter the trap community name of the SNMP
agent.
• Trap to be Received: Select the types of traps to receive from the SNMP
agent.
- Delete: Selecting a trap on the [SNMP Configuration > Advanced] page and
clicking this button deletes the trap. You can select and delete multiple traps
at once.
6. Select [Apply] to reflect the new settings.
7. Enter the user ID and passcode and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8. When the reboot message appears, select [Reboot Machine].