Quick Start Guide

10
E. After logging the web GUI, you can view system information and perform configuration of the
gateway. It’s suggested that you change the password for the sake of security.
6. Network Connection
A. Go to “Network” → “Interface” → “Port” page to select the connection type and configure Ethernet
port information, click “Save & Apply” for changes to take effect. UG63 supports Static IP, DHCP and
PPPoE modes. If you use static IP, ensure the “Gateway” IP address is the same as your modem/router
Ethernet port address.
B. Connect Ethernet port of gateway to network devices like router or modem.
C. Log in the web GUI via the newly assigned IP address and go to “Status” → “Network” to check
Ethernet port status.