Quick Start Guide

14
D. Go to “Network Server” → “General” page to enable the network server and “Milesight IoT Cloud”
mode.
E. Log in the Milesight IoT Cloud. Then go to “My Devices” page and click “+New Devices” to add
gateway to Milesight IoT Cloud via SN. Gateway will be added under “Gateways” menu item.
F. The gateway is online on Milesight IoT Cloud. After that you can add node devices to cloud directly.
9. Connect UG63 to UG65/UG67
Milesight UG6x LoRaWAN
®
gateway can set up multi-gateway architecture, which can make different ga
teway failover each other and extend signal coverage, while make one node device
roams in multiple gateways. One UG65/UG67 gateway can be used as network server and other UG6x
series gateways can be used as packet forwarder and transmit all data to the main gateway.
ＵＣ３Ｘ５２－
g
ＥＮ
Search
Me
My Devices
Event center
三４
Tvoc
⑥ ｖ Ｏ
a few seconds agc
ux
Dashboard
8 Map
o
History
Inactive 3
２７℃
Cancel
llmination
６１２３Ａ１２４
＋
⑥ Ｌ Ｏ
sociated with your
Gateway5
offline 1
十 Ｎｅｗ Ｄｅｖｉ ｃｅｓ
*Name:
*SN:
Normal 1
g
Barometric Pressure
Confirm
ＡＭ１０２
６１３６Ａ３９０２３
2lux
⑥ Ｌ Ｏ
Add Device
ination
宣 Ａｌ ａｒｍ １
３０
Activity Level PIR)
keport
Humidity
Devices
６１１５１１０９
？ Ｌ Ｏ
15 minutes agc
△
Sharing Cente
５１％
６１２８Ａ２１７
co2
Tigers
UC3X
Temperature
Packet Forwarder
Profiles
Mlsight loT Cloud
RX1 Delay
sec
Applications
５
Join Delay
０１０２０３
info
sec
Gateways
NetlD
Network
Lease Time
Network Server
General Setting
８７６０－ ０－ ０
General
Enable
System
Maintenance
Log Level
hh-mm-ss
Status
Device