Quick Start Guide

2
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
 The device must not be modeled in any way.
 Do not place the device close to objects with naked flames.

Do not place the device where the temperature is below/above the operating range.
 Do not power on the device or connect it to other electrical device when installing.
 Check lightning and water protection when used outdoors.

Do not connect or power the device using cables that have been damaged.
Related Documents
This Quick Start Guide only explains the installation of Milesight UG63 LoRaWAN
®
Gateway. For more
functionality and advanced settings, please refer to the relevant documents as below.
Document
Description
UG63 Datasheet
Datasheet for UG63 LoRaWAN
®
Gateway.
UG63 User Guide
Users can refer to the guide for instruction on how to log in the web GUI, and
how to configure all the settings.
The related documents are available on Milesight website: https://www.milesight-iot.com
Declaration of Conformity
UG63 is in conformity with the essential requirements and other relevant provisions of the CE, FCC, and
RoHS.
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the