Quick Start Guide

8
C. Fix the mounting plate to the wall plugs with screws.
D. Turn the device clockwise to lock it to the mounting plate.
5. Login the Web GUI
UG63 provides web-based configuration interface for management. If this is the first time you configure
the gateway, please use the default settings below:
Username: admin
Password: password
Connect PC to UG63 ETH port through PoE injector or PoE switch. The following steps are based on
Windows 10 operating system for your reference.
A. Go to “Control Panel” → “Network and Internet” → “Network and Sharing Center”, then click
“Ethernet” (May have different names).