User manual

Amazt Smart Watch
Installing the APP
Download the app «Amazt
Smart Watch» or scan the QR-
code, to install the application.
Turn on / o󰀨 watch
Click on the watch button, which is located on the
right side, to turn on the display.
If in the on mode, press and hold this button, you’ll
turn o󰀨 your watch.
While rst using, the watch display may appear QR-
code to link Amazt Smart Watch with your phone.
Precautionary measures
The watch has a IP67 level of dust and water
resistance, can be in water with room temperature at
a depth of 1 meter for 30 minutes. But do not use the
device in the shower and during the voyage.
• Do not use watch under the water. If watch becomes
wet, it is necessary to wipe the touch screen with a dry
cloth, and then you can charge your device and start
using them.
The watch is not protected from sea water, acid and
alkaline solutions, chemicals and other substances. In
case of breakage or damage of device as a result of
improper use, you can not use the warranty service.
Pair with phone
Open APP «Amazt Smart Watch», to register, and
then, following guidance, scan the QR-code to link
Amazt Smart Watch.
Charging watch
Place the watch on the proper docking station to recharge
the device.
Please use the hours to recharge the battery charger with
a nominal output voltage of 5V and 500mA output current
and higher
Main parameters
Title: Amazt Smart Watch
Model: A1602
Battery Capacity: 280mAh
Type of wireless connection: Bluetooth 4.0 / Wi-Fi
Input voltage: 5V DC
Input Current: 500 mA (MAX)
Operating temperature: 00C - 400C
The level of water resistance: ІR67
Requirements: support for Bluetooth 4.0 on Android 4.4
or 7.0 or above iSO
Select «More and more devices» to check the number of
CMIIT ID

Summary of content (2 pages)