Thanks for choosing 70mai dash cam Equipped with a camera chip and image sensor which allows to record high-quality videos, 70mai dash cam becomes a perfect travel companion. Read this manual carefully before using the product. Product overview Power key The device has only one physical key, the power key.
Click 3 times to format the TF card; Click 5 times to restore default settings. Indicator A ring-shaped indicator is at the outer edge of the power key. The indicator has following states: Off state When the device is turned off, the indicator is turned off as well. Keeping on state When the device is turned on, the indicator is turned on.
Waiting for accept connection request… Red flashing light Low battery warning. Installation 1. Electrostatic sticker Clean your windshield and put the electrostatic sticker on the recommended area as shown in the figure below. Make sure you remove air bubbles between the sticker and the glass. 2. Stick the camera mount to the windshield Remove the protective cover from the mount and stick the mount’s base to the center of the electrostatic sticker. Make sure your dash cam body is parallel to the ground.
The cigarette lighter receptacle might be positioned differently in your car. The picture is provided for reference only. Voice control 70mai dash cam supports voice control. When the dash cam is running, you can control it by following voice commands: Take picture: Take a photo. Record video: Record an emergency video clip and save separately to event folder. Record without sound: Stop recording sound, the video recorded is soundless.
2. At the homepage of app, click “Add new dash cam” and follow the guide to build connection to your dash cam. The default password of the dash cam is 12345678. 3. When you hear prompt “Please click the power key to authorize”, press the power key to accept the connection request from your cellphone. 4. At first time connected to the dash cam, on the app you will see new user orientation.
1.Preview Get realtime preview from the dash cam. You can switch to full size preview by clicking the “enlarge” icon on the right bottom of the preview. 2.Take photo Click the “take photo” button to take a picture. When you hear a shutter sound and voice prompt “Photo was saved”, the photo has been taken and saved in both albums of the dash cam and cellphone. 3.View the album of dash cam At the dash cam plug-in page, click “Album” icon to enter the album of the device.
G-sensor Low sensitivity The sensitivity of g-sensor Sound recording state. If sound recording is on, the sound Sound recording Off inside the vehicle will be recorded. All the videos and sound are saved only in TF card. Speaker volume Big The sound volume of dash cam’s speaker. System time of the dash cam. When 70mai dash cam app System time – accesses the device, you can sync the cellphone’s time to the device.
PERSONAL CENTER At homepage of the app, click “User” icon on the left top to enter personal center. 1.Modify profile In personal center, you can modify your avatar, nickname, name, and gender. 2.Manage your devices You can also manage your devices here. You can add new device, and delete existing device as well. 3.View app information You can view the version, user agreement, privacy terms in personal center. If you have any question about the app and the dash cam, please give us your feedback.
Here’s the amount of videos the cards with different capacity can store: Video type 16GB 32GB 64GB Normal ≈ 1.5 hours ≈ 3 hours ≈ 6 hours Event ≈ 10 videos ≈ 20 videos ≈ 40 videos Photo 300 photos All videos are overwritten starting from the older ones when the storage space limit is reached. Make sure you back up the footage to your phone or computer when an accident happens. TF cards may be damaged during constant recording and wiping videos.
Power source Your dash cam gets electricity from the cigarette lighter receptacle. Use the original power cable and adapter to keep the input power source steady. We shall not be responsible for any loss or damage caused by using other power sources besides the cigarette lighter receptacle, or using non-original power cables and adapters. Some vehicles still supply power to the cigarette lighter receptacle after the engine is off.
Make sure the adapter is inserted tightly in the cigarette lighter receptacle, and the USB cable is connected correctly. Make Camera doesn’t sure that the car’s engine is started and work there is power output from the cigarette lighter receptacle. If this doesn’t help, Turning on poke the Reset button on the bottom of the dash cam by a pin to restart it. Camera reboots Make sure you’re using the original after it’s supplied accessories, pull out the adapter, powered on and then insert again.
Video files were corrupted System time not correct Replace the TF card based on your need. Please adjust system time on your 70mai dash cam app after connect your cellphone to the device. Press the Reset button using a pin, or Device doesn’t press and hold the Power button to turn respond the dash cam off, and then turn it on again.
traffic accident and/or bears any loss due to the product failure, information loss, or product operation. 2. Due to the differences in vehicle type, driving preferences, the environment, and other differences, parts of the product or the whole product may not work normally in the given circumstances. The recording may not work normally because of losing external power source, working in abnormal temperatures and/or humidity, collisions, the TF card damage, and other possible reasons.