User Manual

Turning on
Camera doesn’t
work
Make sure the adapter is inserted tightly
in the cigarette lighter receptacle, and the
USB cable is connected correctly. Make
sure that the car’s engine is started and
there is power output from the cigarette
lighter receptacle. If this doesn’t help,
poke the Reset button on the bottom of
the dash cam by a pin to restart it.
Camera reboots
after it’s
powered on
Make sure you’re using the original
supplied accessories, pull out the adapter,
and then insert again.
Working
Camera doesn’t
start recording
after it’s been
powered on
You need to activate the dash cam by
70mai dash cam app when you are first
time using the device. The device does not
record videos if not being activated.
If the device does not start recording
while already activated, please check if
your TF card meets the requirement of
the device, and make sure you have
formatted the TF card by the device
before using.
Camera stops
recording
unexpectedly
Re-format your card or replace it.
Videos aren’t
clear
Make sure your windshield is clean and
the dash cam’s lens isn’t covered by an
object.
Sound isn’t
recorded
To protect your privacy, sound recording
is closed by default. If you want to record
the sound, please open sound recording in
device settings.