Operation Manual

Beva Magic Star Bluetooth Speaker Overview Using
Accessories
Magic Star Speaker
User Manual
USB cabel
Hanging ring
Schematic image of device
Previous track / volume decrease
Status indicator
Charging/ data port
Function switch Button
Play/ Pause
Next track /
volume increase
On/ O button
TF card slot (Max capacity 64GB)
On/O
Press and hold a power button to
turn the device on or o. If within 2
minutes device is not connected, or
for 10 minutes does not play music,
Beva Magic Star Bluetooth Speaker
is automatically switched o so as not
to disturb you and to save energy.
Play/Pause
Click on button to turn on music playback, and pause it.
Function switch button
Click on button to start playback music via Bluetooth or TF
card. Press and hold button to turn o current connection
via Bluetooth.
Using
Volume control
During music playback, press «+»
or «-» to increase or decrease
volume.
Track control
During music playback, press «+»
or «-» to select previous or next
track.
Connection to Bluetooth or using a TF card
Bluetooth connection
1. If Beva Magic Star Bluetooth Speaker is turned on, it
automatically goes into a Bluetooth pairing mode. At this
time, the indicator ashes quickly.
2. Turn on Bluetooth on your phone, select «BEVA-M1».
3. A steady white light indicates successful pairing devices.
(If your device has an old version of Bluetooth, you will
need to enter a password «0000» to connect).
4. After a successful pairing of devices in your phone, open
music player, and select favorite track.
5. Beva Magic Star Bluetooth Speaker has a memory
function. Turn on Bluetooth on your phone, which previously
matched with the device, and after 30 seconds Beva
Magic Star Bluetooth Speaker will automatically perform a
Bluetooth connection.
XIAOMI-MI.COM