User Manual

４Operation steps
Step1：After unpacking, please open the door with the spare key and open the sliding cover.
Step2：Press the power button.（POWER ON）
Step3：Turn the Mode Switch to the outside . (Registration Mode)
※In Registration Mode, the door cannot be closed.
Step3：Register Finger vein samples.
①Open your hands. ⑤The registration starts while both sensors sense finger.
②Select a finger. if the registration is successful, a voice promt will be
The index finger or middle finger is preferred. triggered as below:
③Straighten the finger naturally. "one registration is completed, please reposition your
No muscle tension! finger, register more than 5 times for one finger."
④The fingertip and finger foot are attached to ⑥Repeat step ⑤.
two sensors respectively.
One finger should be registered more than 5 times.
One user should register more than 2 fingers.
Step４：Turn the Mode Switch to the inside . (Recognition Mode)
※In Recognition Mode, the door can be closed.
Step5：Close the door and start to use the BOX.
５Supplementary notes
・Finger bending and muscle tension are easy to lead to recognition failure, so it is very important to relax
and straighten fingers naturally.
・A vibration(pounding, carrying...)sensor is embeded. An alarm will be triggered while a vibration is sensed.
The alarm lasts for 20 seconds. We can stop the alarm with a successful finger vein identification.
・If the door is not closed within one minute after opening, the alarm of "beep - beep -" will be triggered.
The alarm will last for one minute unless we close the door.
・All the finger vein samples will be cleared if we keep pressing the reset button for 6 seconds ！
At the same time, the voice prompt "all the finger vein samples have been cleared, please register finger
vein samples again." will be triggered.
・After recognition, sometimes we can hear a sound like"da-da-da-", don't worry about it !
This is the retry action of unlocking, and it is a normal phenomenon.
・This product conforms to the ROHS standard.
10～25
≤200 Fingers (1 finger/time)
412(L)*290(W)*181(H)
11kg
Number of registrable samples
Applicable Finger Width（mm）
Product size（mm）
Net weight（kg）
≥90
Temperature ０～４０℃
Humidity
30～８０％Rh
（No frosting）
Temperature ‐１０～６０℃
Humidity
2０～9０％Rh
（No frosting）
Use
Environment
Storage and
transportation
Environment
Battery capacity（mAh）
Standby time（days）